Everything is Included...

The most complete factory package available!

This Self-Install Package can be customized by one of our factory consultants for your specific needs. A Complete Package One Price.

Call us Toll Free at 1-866-375-9535

Back to Products & Solutions

Forced Air Self-Install Package

 

100’ From Furnace or Solar to Home

Plus 50’ Inside Home

• 1 - 6' x 6' Geotextile Ground Cover

Standard Self-Install Ready Back of Furnace

Factory Pre-Plumbing Saves You 4 to 6 Hours

• 1 - TACO 011 Circulator Pump (for up to 100')
• 1 - 1" Threaded flanges for circulator (set)
• 2 - 1" Brass Full Port Ball Valves (threaded)
• 2 - 1" PEX x 1" Male Adapter fittings
• 2 - 1" PEX Crimp Rings
• 1 - 1" Brass x 2" Nipple
• 2 - 1" Brass 45 Ell
• 1 - 1" Brass Cap
• 1 - 1" Brass Plug
• 1 - 1" Brass 90 Ell
• 4 - 1" Brass x Close Nipple
• 1 - 3/4" Bronze Boiler Drain
• 1 - 3/4" x 3/4" Hose Swivel Adapter
• 2 - Rubber Washer

Between The Home and The Furnace or Solar (Underground)

(Enough material to set the furnace 100' from the home. Additional distance is available.)

• 200' - 1" High temperature flexible PEX pipe (cross-linked polyethylene)
• 13 - 8' Biomass Direct polyethylene closed-cell foam insulation pieces (104' distance)
• 12 - Biomass Direct Joint Connector Boots
• 2 - Biomass Direct Protective End Cap Boot
• 24 - Joint Boot Ties
• 6' - 1 1/8" ID x 1" wall Transition Insulation

Inside The Home

• 50' - 1" High temperature flexible PEX pipe (cross-linked polyethylene)
• 54' - 1-1/8" ID x 1/2" wall closed-cell insulation (to cover the pipes inside/under the home)
• 1 - Roll of 2" wide closed cell insulation tape (to join the insulation)
• 10 - 1" PEX x 1" PEX Brass elbows
• 2 - 1" PEX couplings
• 24 - 1" PEX Crimp Rings

1 - Inline Air Removal Drain Kit

This little package allows you to use your home's water supply to purge the hydronic system of air.

• 1 - 3/4" x 3/4" Hose Swivel Adapter
• 2 - Rubber Washer
• 1 - 3/4" Bronze Boiler Drain
• 1 - 1" x 1" x 3/4" Threaded Brass Tee
• 2 - 1" PEX x 1" Male Adapter fittings
• 2 -1" PEX Crimp Rings
• 1 - Labor to assemble and test

Forced Air Duct Coil

Water-to-Air Heat Exchanger Duct Coil

One Duct Coil included with package up to size DCV-140; 50K, 80K, 100K, 120K, 140K. Other sizes also available.

Everything you need:

• 1 - 140,000 BTU/hr. Duct Coil* (Water-to-air Heat Exchanger) Shown Above
• 1 - Duct Coil Self-Install Ready Pre-Plumbed Kit Including:
  • 2 - 1" PEX x 1" Male Adapter Brass fittings
  • 2 - 1" PEX Crimp Rings
  • 2 - 1" Brass Full Port Ball Valves (threaded)
  • 2 - 1" Stainless Steel Dielectric Union
  • 2 - 1" Brass Ell's
  • 2 - 1" Copper x 1" Male Threaded Adapter
  • 1 - Labor to solder, fit, and test the assembly (so you don't have to)
• 1 - 24V wall mounted thermostat
• 25' - 2 Conductor thermostat wire
• 1 - 24V Fan Control Center
• 1 - Tru Blue Pipe Compound Tube
• 1 - PEX Combo Crimp Tool (3/8" and 1")
• 4 - Duct Coil Mounting Brackets

Maintain Your Furnace

Included FREE with purchase of package

Protect your investment by maintaining the water quality in your furnace.

Wood Burning Furnace Water Treatment Kit includes:

• 1 gallon of Certified Laboratories “Outdoor Furnace Water Treatment” chemical (treats up to 300 gallons).
• 4 sample bottles for treated furnace water.
• 4 shipping containers, labels and instructions for treated water sample bottles.
• 4 furnace water analyses and reports produced by Certified Laboratories.
• Instructions included.

Industry Leading Installation & Operations Manual Included

• Technical Consultants Available